|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
USB-UIRT +56 and Dish 811 Receiver
I bought the USB-UIRT and I can't figure out how to get it to work with my Dish 811 receiver. Everything is installed correctly but I can't figure out how to set it up properly in the SageTV setup. Can anybody help me out?
Bob |
#2
|
|||
|
|||
IR for DISH811 and 8.0 UHF Pro remote
Help:
Does anyone out there have an IR for USB-UIRT+56 that works with the DISH 811 and the remote? I spent the 5 bucks for the 56K and thought that would work but I can't get it to learn codes or even be recognized by the USB-UIRT. Help would be appreciated. Bob |
#3
|
||||
|
||||
Make sure your 811 is set Address Remote 1, and just so you know the 811 Remote can't be recognized by the USB-UIRT you must have 301 Remote.
Last edited by SHS; 03-16-2006 at 06:26 PM. |
#4
|
|||
|
|||
Hey folks - I am getting redy to relocate to a high rise that is wired for AT&T Home Entertainment (DISH Network) using DISH 811 receivers. Until now, I have had analog cable. Could you clue me into what I need to do in order for my PVR-USB2 units and SAGE to control the 811 boxes. Which IR blaster should I get (will need to control 2 811 boxes)... Thanks!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|