|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Strange problem with pvr-250 and sage tv
I have a strange problem, I'm using sagetv , a ivac16 pvr-250 and pinnacle showcenter media receiver.
If I record a show through the Svideo/ line-in I can play the mpg on the pc but the mpg that gets streamed to the media reciever has no sound. If I record through the tuner, the audio is fine. I can see no difference in the mpeg generated by the two processes, bitrates look the same using vcdeasy audio analyser tool. Equally strange, is that the showcenter has 2 audio outputs, one goes to the tv the other to the stereo. I CAN get the sound from the stereo reciever. THIS is very Very wierd. |
#2
|
|||
|
|||
Quote:
Checked eveything obvious. |
#3
|
||||
|
||||
Are you get audio on the PC with S/Video?.
|
#4
|
||||
|
||||
skip the 1st post I miss read your post
|
#5
|
|||
|
|||
Quote:
Audio plays fine under following conditions: 1) played from pc 2) recorded from tuner 3) through audio reciever connected to showcenter, Thats the strangest one. (their both rca inputs, not spif or digital) . Maybe the receiver can handle a higher range. |
#6
|
||||
|
||||
So if I under you rigth the clip will playback fine using the tuner recording on both output on the showcenter but the clip that are recorder from S/Video only work over stereo reciever output is that rigth?.
|
#7
|
|||
|
|||
Quote:
What I need to figure out is what is the difference in the way the hauppage card creates the mpeg file. |
#8
|
||||
|
||||
try lower audio bitrate see what happing
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|