DVB Enhancer for SageTV

[harco]

From the dvbe recorder you put ONID 4102 in Network ID box and 107 in the channel/sid box. check record by sid then start.

[Jabroni]

Originally Posted by harco

From the dvbe recorder you put ONID 4102 in Network ID box and 107 in the channel/sid box. check record by sid then start.

Still no luck, says that it cannot find the traponsder for that SID/ONID

Heres the txt file it creates with the output of the console

[harco]

Change these settings

ServedCAIDs=1816
IncludeTuners=1
ExcludeTuners=2,3,4
UseNewTuningMethod=1
BouquetName=0

And are you sure about the diseqc settings? It would normally be 1,2,3 on diseqc1=

[mpogr]

Be careful with UseTuningMethod=1, it's like hit and miss ATM. And it definitely won't work for DVB-C!

[Jabroni]

Originally Posted by harco

Change these settings

ServedCAIDs=1816
IncludeTuners=1
ExcludeTuners=2,3,4
UseNewTuningMethod=1
BouquetName=0

And are you sure about the diseqc settings? It would normally be 1,2,3 on diseqc1=

Seems I was able to tune in to the SID that were discovered (the ones that were explicit on the initial autodiscover) but for some reason not all the channels are available. Is there a way to get a list of discovered SID ? Or to force a complete scan on all detected transponders ? (I know I do get all since when using DVBDream I get them)

*EDIT*

OK dumb me, I didnt had the correct Network ID. Now im stuck in getting signal lock on the rest.. ill keep playing with the disecq.ini to see if I can get all channels/sats workings

[garystein]

Is there any way to switch this to true yet with this DVBE4SAGE, just tried the new version and switching to true in sage properties and get no signal message.

[Whitey]

Originally Posted by garystein

Is there any way to switch this to true yet with this DVBE4SAGE, just tried the new version and switching to true in sage properties and get no signal message.

I don't think this feature has been added yet to DVBE4Sage

Whitey

[mpogr]

New version has been uploaded, with improved DVB-C and North America support.
For up-to-date setup instructions, refer to this document (courtesy of CodeMonkey).

[Jabroni]

Ive been using this software for a couple of days now. I must say its rock solid. Running it on NA, w/ a genpix and n3xt cardclient. Im using raw diseqc commands which I must say works great, and with the auto sid feature so we dont need to mess with the sage channel guide (since i just have 1 provider). Congrats on mpogr for this software and CodeMonkey for adapting it for NA users

[wangwh]

I have a 22khz switch to combine two circular LNBs and connect to one port of a 4x1 diseqc switch, but I tried a lot of settings, but still cannot get them working, I can get other LNBs working that are directly connected to the diseqc switch. They work with DVBDream without problem. Can anyone tell me the settings to make them work? Thanks.

[Jabroni]

I was thinking if it would be possible to have stored the services definition dumped to a temprary file on exit, so in case we need to close/open, it wouldnt need to autoscan again on startup. Maybe with a limitation that if the service file is more than 1 week old it would rescan (and I think it would require an autoscan trigger handy on the GUI in case we want to manually trigger)

[banjo]

Originally Posted by mpogr

New version has been uploaded, with improved DVB-C and North America support.
For up-to-date setup instructions, refer to this document (courtesy of CodeMonkey).

Hi,

Well i'm using en erliaer version that works just fine, but the new version is not working for me.

i'm using vg.. and YES provider, what do i need to do to make it work.
2. is it going to be faster in channel changing the older versions?


Thanks
and again
G R E A T E J O B !!!!!!!!!

[bjkiller]

Originally Posted by banjo

Hi,

Well i'm using en erliaer version that works just fine, but the new version is not working for me.

i'm using vg.. and YES provider, what do i need to do to make it work.
2. is it going to be faster in channel changing the older versions?


Thanks
and again
G R E A T E J O B !!!!!!!!!

there removed YES tuner frequancy as default from configuration - just specify.

[Tuning]
InitialFrequency=10824000
InitialSymbolRate=27500
InitialPolarization=V
InitialModulation=QPSK
InitialFEC=3/4

[John@TunerUK]

Is there any chance this newer version will fix the issues I was having with the newer technotrend cards? My original post regarding the issue is Here

Also, I was having issues with the Music channels on Sky UK since upgrading to SageTV V7.My original post with logs for that issue is Here

I just wanted to check before I go messing around with a (mostly) working system.

Also, how do I go about updating? Is it just a case of copying and pasting the new files over?

Cheers

John

[sofakng]

Originally Posted by Jabroni

Running it on NA, w/ a genpix and n3xt cardclient.

My Genpix Skywalker card should be arriving shortly and I've been doing a ton of research on what I need to record content from my legal Dish Network account.

Is n3xt the best card server to use? I don't want to share my card with anybody (ie. I don't want to do anything illegal), I just want it to work with Sage for recording shows.

It seems like Acamd is also very popular as is newcs...

[willplaice]

I wondered if anyone could comment on my config,

I can go for hours with no breaks in decoding, but some programs will break up badly, such that i have to stop and start the program multiple times..

I'm using Hadu as a cam as it's the most stable i've found, config

[General]
PluginActive=1
UseTransparency=1
MonitorSize=710,417;45,45,45,60,24,90,59,144;35,102,156,24,140

[Options]
UsePSITables=0
SurveyPMT=0
UsePATforPMT=0
DontUpdViewer=1
MaxECMPIDs=0
MaxConnections=0
DisplayIPorURL=1
ECMTimeout=10
MaxCAIDLoops=4
DCWsOneServ=1
LogMessages=0
LogMessLevel=1
EMMAlone=0
EMMFaked=0
EMMLog=0
Systray=0

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_Sky Uk]
Server=CCCam:aa.yy.xx:14000:0:usernameassword
Active=1

dvbe config
[General]
LogLevel=3
NumberOfVirtualTuners=4

[Plugins]
DCWTimeout=10
ServedCAIDS=963

[Tuning]
InitialFrequency=10714000
InitialSymbolRate=22000
InitialPolarization=H
InitialModulation=QPSK
InitialFEC=5/6
LNB_SW=11700000
LNB_LOF1=9750000
LNB_LOF2=10600000
TuningTimeout=20
UseSidForTuning=0
InitialRunningTime=30
TuningLockTimeout=10
DVBS2Tuners=1,2

[yallah]

Hi,

I want use Canal sat from astra 19.2E.

But DVBE4SAGE told me :

2011-02-28 04:23:57.640 DVBE4SAGE Encoder SVN revision 247
2011-02-28 04:23:57.640 Loading configuration info from "C:\Program Files\dvbe4sage\dvbe4sage.ini"
=========================================================
Configuration file dump:

[General]
LogLevel=2
SetupType=DVBS
NumberOfVirtualTuners=2
NorthAmerica=0

[Plugins]
DCWTimeout=5
IsVGCam=0
MaxNumberOfResets=1
ServedCAIDs=
ServedPROVIds=

[Tuning]
LNBSW=11700000
LNBLOF1=9750000
LNBLOF2=10600000
InitialFrequency=11361000
InitialSymbolRate=22000
InitialPolarization=H
InitialModulation=QPSK (DVB-S)
InitialFEC=2/3
DVBS2Tuners=1
TSPacketsPerBuffer=1024
NumberOfBuffers=400
TuningTimeout=20
TuningLockTimeout=5
InitialRunningTime=20
UseSidForTuning=0
UseNewTuningMethod=0
ScanAllTransponders=0
ExcludeTuners=
ExcludeTunersMAC=
IncludeTuners=
IncludeTunersMAC=
UseDiseqc=0
AutoDiscoverONID=0
IncludeONIDs=
ExcludeONIDs=

[Output]
TSPacketsPerOutputBuffer=160000
TSPacketsOutputThreshold=135
DisableWriteBuffering=0

[Encoder]
ListeningPort=6969

[Recording]
PreferredAudioLanguage=eng
PreferredAudioFormat=ac3
PreferredSubtitlesLanguage=eng

[Advanced]
PMTDilutionFactor=1
PATDilutionFactor=1
PMTThreshold=20
PSIMaturityTime=10
MaxECMCacheSize=3000
EnableECMCache=1
ECMCacheAutodeleteChunkSize=300
BouquetName=0
PreferSDOverHD=0
ExcludeTIDs=PreferredTIDs=
End of configuration file dump
=========================================================
2011-02-28 04:23:57.656 Working with MDAPI plugins
2011-02-28 04:23:57.687 #1: Loading filter "USB 2.0 BDA DVB-S Tuner" - succeeded!
2011-02-28 04:23:57.687 #1: Tuner Filter Info = "USB 2.0 BDA DVB-S Tuner"
2011-02-28 04:23:57.703 #1: Loading filter "USB 2.0 BDA DVB Capture" - succeeded!
2011-02-28 04:23:57.703 #1: Loaded our transport stream filter
2011-02-28 04:23:57.703 #1: Added demux filter to the graph
2011-02-28 04:23:57.703 #1: Connected demux to our filter output pin
2011-02-28 04:23:57.718 #1: Device ordinal=1, MAC=000:5C:61:6E:5D, type=TechnoTrend USB 2.0
2011-02-28 04:23:57.718 #1: Using tuning request-based tuning method...
2011-02-28 04:23:57.906 #1: Starting initial run for autodiscovery, transponder data: Frequency=11361000, Symbol Rate=22000, Polarization=H, Modulation=QPSK (DVB-S), FEC=2/3
2011-02-28 04:24:12.609 Received command: "NOOP"
2011-02-28 04:24:17.906 #1: The initial run for autodiscovery finished
2011-02-28 04:24:17.906 #1: The tuner failed to acquire the signal
2011-02-28 04:24:18.000 #1: Graph successfully stopped


How can i resolve my problem .... PLZ ..HELP need astra 19.2 for canal sat

[mpogr]

yallah,

You specified wrong modulation for the initial tuning, it should be 8PSK. Also, according to Lyngsat, the frequency is 11362 and not 11361, though this is probably not the main problem.

Cheers,

Michael.

[Jabroni]

Originally Posted by sofakng

My Genpix Skywalker card should be arriving shortly and I've been doing a ton of research on what I need to record content from my legal Dish Network account.

Is n3xt the best card server to use? I don't want to share my card with anybody (ie. I don't want to do anything illegal), I just want it to work with Sage for recording shows.

It seems like Acamd is also very popular as is newcs...

You need to do some more reading. I suggest you go to dvbn.happysat.org and do some search... your mixing up cardservers and cardclients

newcs, rqcs == cardserver

acamd, n3xt == cardclient

so far the best combination that has worked for me its rqcs + n3xt

[yallah]

Thx mpogr,

But still the same ... The tuner failed to acquire the signal.

Somebody can send me a .ini to take exemple with AutoDiscoverONID ?

Thx by advance