HELP Error (-3,0x800070043) and Error (-5,08007000e)

[Podmodder]

i get the sage.PlaybackException Error (-5,08007000e) There was a problem rendering the audio portion of the content for playback over and over every second until i restart my pc, then it works until i watch a recording then it breaks again and i have to reboot again.

Sometimes it the sage.PlaybackException Error (-3,0x800070043): There was a problem accessing the filesystem for capture.

i have uninstalled and reinstalled twice and reinstalled all my codecs. this is on a brand new pc i just built on friday. all was well on my previous pc.

WIN 7 ULT 2 tb msi board intel core 2 duo 2 gigs ram, WAY better than my old P3 with WIN 7 except for this, really getting tired of rebooting so i can watch something different

EDIT: if it is recording something at the time, the recordings turn out fine with no problems...

[Podmodder]

ok, so i can get rid of the no audio error if i go and change the audio renderer from default to something else then back again but then i have no sound until i reboot. it is doing now everytime i change the channel getting reall frustrating...

[Podmodder]

i got tired of it not working, so i went back a restore point and now all is well, so a windows update must have broken it, so no more windows updates for me.

[Podmodder]

well, its broken again. i read on this thread that it might be a sharing issue but there wasnt really a solution explained. can any one help?

[Savage1701]

Did I miss your system profile on your posts? I was trying to figure out what type of recording you were doing that was causing your issues. Maybe I missed it. Are you recording with an analog cable card, QAM, OTA ATSC or HD-PVR?

Most of my problems of that type came from using an HD-PVR and such, so I wanted to know what your recording source was.

Ooops - now I see some of your system, but what was doing the capture?

[Podmodder]

I have a Hauppauge WinTV PVR PCI II 150. I was thoroughly "peeved" at it last night so I did an entire re-install of windows 7 and all is well for now, but it worked ok for the first month last time too so a few tips for "just in case" would be ok too I guess

[Savage1701]

Originally Posted by Podmodder

I have a Hauppauge WinTV PVR PCI II 150. I was thoroughly "peeved" at it last night so I did an entire re-install of windows 7 and all is well for now, but it worked ok for the first month last time too so a few tips for "just in case" would be ok too I guess

One other thing - I use a ethernet-controlled power strip. I have my BIOS set to restore on AC loss, and Sage set to boot to tray on startup. I also have my HD-PVR on that strip. About every third day I power off the system via shutdown, and then I kill all AC to it and to the HD-PVR for about 30 seconds. Then I restart the HD-PVR, and in about 10 seconds switch the Sage Server's outlet back on (All controlled by a macro feature the PDU has in it). I've had zero problems with any tuner for about 2 months now.

[Podmodder]

if it starts acting up again i'll try that, mine is all in one box though hooked up to my tv, no server