Channels showing for Tuners not configured

[antplugger]

Hi Guys,

Running the current beta and have a issue with 2 x DVB-T tuners. Here is the sequence.

1. Install current Beta
2. Do scan and find +40 channels
3. Edit Avermedia-Card-0.freq (whatever the filename!) and reorder channels
4. Copy Avermedia-Card-0.freq to Avermedia-Card-1.freq
5. Start Sage in server mode
6. Program guide looks OK but getting different channels when tuning (ie tune to Channel 2 get Channel 7 content)
7. When I go into Setup Tuners and configure channels I see duplicate sets of channel numbers. One set for the scanned channels and one set for the reordered (ie two channel 1's, two channel 2's etc)
8. I removed both tuners.
9. I go into channel guide and even after 12 hours and a restart I get a list of channels from the removed tuners.

Whew!

Any ideas on how to clean this up - or just do a rebuild from fresh ?

If I do a rebuild from fresh and I copy over the wiz.bin will in move all my channel and setup specs and move the problem I have now ?

Thanks

[rickgillyon]

Are you using a lineup or just the OTA EPG?

[antplugger]

A lineup from the Multisource XMLTV plugin

Cheers