SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-15-2008, 03:45 PM
tjchuck tjchuck is offline
Sage User
 
Join Date: Nov 2008
Location: Arizona
Posts: 17
Frustrated with USB UIRT and DISH 311

I have the latest trial version of Sage TV loaded and everything is working great I just can not get my USB-UIRT to transmitt a signal to my Dish 311 in order to change the channel so that I can record a show.

I have gone into "setup video Sources" and set the tuner control to USB-UIRT. I programmed in the infrared code and it says that all of them checked ok then went to test the codes and they will only work if I put the USB UIRT 2 inches away from the Dish 311!!!!. However when a channel is needed to be changed to record a show on a different station Sage TV does not tell the USB UIRT to transmitt the loaded signals even when 2 inches away. In addition is there anyway I can not have the USB-UIRT further than 2 inches away so I can use it as a reciever.

Here are the Specs
Dishnetwork with Dish311 receiver (yes standard def but before I go HD I wanted to test the SD out first to see what I am getting into)
USB-UIRT with addition 56KHz IR sensor
SageTV V6.4 Trial
Reply With Quote
  #2  
Old 11-15-2008, 05:09 PM
tjchuck tjchuck is offline
Sage User
 
Join Date: Nov 2008
Location: Arizona
Posts: 17
Anyone Know Where to input this information into SAGE TV?

As I was doing more research I found someone with a similar problem but no one ever followed up with a fix.

I suspect that I need to manually input the remote codes into the USB UIRT or SAGE TV but not sure where. Here is the data from a previous post I just need to know what file this gets put into.

You'll need to change the part to match your file name (eg 211 in the first one)

For Remote Code 1
211 56000 0 3 600 800
RepeatCount 5
0 0000 0048 0000 0011 0017 0163 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
1 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
2 0000 0048 0000 0011 0017 0161 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
3 0000 0047 0000 0011 0017 0166 0017 00A3 0017 00A3 0017 00A3 0017 0063 0017 0063 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A2
4 0000 0049 0000 0011 0017 0160 0017 00A0 0017 00A0 0017 0061 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 009F
5 0000 004A 0000 0011 0016 015C 0017 009E 0017 009E 0017 0060 0016 009F 0016 009F 0017 0060 0017 009F 0017 009F 0017 009E 0017 009E 0017 009F 0016 009F 0016 009F 0017 009E 0017 009F 0016 009D
6 0000 0049 0000 0011 0017 0160 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
7 0000 0047 0000 0011 0017 0166 0017 00A3 0017 00A3 0017 0063 0017 0063 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A2
8 0000 0047 0000 0011 0017 0166 0017 00A3 0017 00A3 0017 0063 0017 0063 0017 00A4 0017 0063 0017 00A3 0017 00A3 0017 00A3 0017 00A3 0017 00A4 0017 00A3 0017 00A3 0017 00A4 0017 00A3 0017 00A2
9 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0

Remote COde 2
311BR2 56000 0 3 600 800
RepeatCount 10
0 0000 0048 0000 0011 0017 0163 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
1 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
2 0000 0048 0000 0011 0017 0164 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
3 0000 0048 0000 0011 0017 0164 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
4 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
5 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
6 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
7 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
8 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1
9 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1

Remote Code 3

311BR3 56000 0 3 600 800
RepeatCount 5
0 0000 0049 0000 0011 0017 0160 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
1 0000 0049 0000 0011 0017 0161 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
3 0000 0049 0000 0011 0017 0160 0017 00A0 0017 00A0 0017 00A0 0017 0061 0017 0061 0017 00A0 0017 00A0 0017 0061 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 00A0 0017 009F
2 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
4 0000 0049 0000 0011 0017 0161 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
5 0000 0049 0000 0011 0017 0161 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
6 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
7 0000 0048 0000 0011 0017 0161 0017 00A1 0017 00A1 0017 0061 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 0061 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 00A1 0017 009F
8 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
9 0000 0048 0000 0011 0017 0163 0017 00A2 0017 00A2 0017 0062 0017 0062 0017 0062 0017 00A2 0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A0
Reply With Quote
  #3  
Old 11-15-2008, 08:50 PM
briands briands is offline
Sage Icon
 
Join Date: Aug 2004
Location: Bloomington, IN
Posts: 1,093
Look in program files\sagetv\common\remotecodes\usb-uirt transceiver
Reply With Quote
  #4  
Old 11-17-2008, 05:16 PM
tjchuck tjchuck is offline
Sage User
 
Join Date: Nov 2008
Location: Arizona
Posts: 17
Thankyou it works awesome!!!
Reply With Quote
  #5  
Old 11-17-2008, 09:49 PM
briands briands is offline
Sage Icon
 
Join Date: Aug 2004
Location: Bloomington, IN
Posts: 1,093
BTW, those are my codes and I think everyone who has used them has been successful, but there may be an option to tweak some of the settings in the first line and maybe the repeat count to get better or faster results.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
R5000(VIP211) for DISH and SageTV OldPCGUY Hardware Support 31 02-24-2009 05:35 PM
UIRT Questions From A Noob jackc111 Hardware Support 5 05-03-2007 08:42 PM
Usb Uirt doesn´t work in Sagetv Service mode in V4 Nadim Hardware Support 3 12-08-2005 12:32 AM
UIRT controlling Dish jsturtevant Hardware Support 4 02-09-2005 11:16 PM
usb uirt using as reciever and blaster? bones71 Hardware Support 2 11-08-2004 08:35 AM


All times are GMT -6. The time now is 01:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.