HD100 - no HDMI on 12/24 beta?

[valnar]

Did anyone else lose HDMI with yesterday's beta? Going back to the August release restores HDMI for me. Composite works with the latest beta, which I had to switch to in order to see the unit.

I also had the same issue with the previous beta.

[JREkiwi]

I lost my HDMI too, but it came back after 2 power resets via the switch on the back. Haven't had a problem since then.

John

[thatdude90210]

I just had garbled hdmi audio, the video was OK. With both the 12/22 and 12/24 beta, my HD 100 would garble the audio after a little while. Restarting the HD 100 was only a temporary fix, it would get messed up again after a while.

I had to revert back to the august firmware to fix it.

[Archerkit]

I had a similar problem. The interface was fine, but I was unable to play online videos. Garbled video (green flashes, random lines) and I had to power off the extender to get it to respond.

It may have also had a problem with local recordings, but I reverted to August before trying. It's fine now.

[logsvp]

I had to reset one of my HD100s after applying the latest beta update as I completely lost HDMI. Connected it to a composite input and then reset the box (Start with Menu/Up held down) and then reloaded the previous stable firmware (August I think).
My other HD100 appeared to be OK but was losing HDMI connectivity on odd occasions when switching it on. I have reset that one also to the stable firmware.
I can't get any HDMI output from my new (arrived Christmas Eve ) HD200. The HD200 is working with Composite and S-Video.

[JREkiwi]

Apologies, my HDMI problem was with the 12/22 update, I thought the 12/24 reference was a typo, as I'd not seen any notification of a 12/24 update.

John

[bjkiller]

Originally Posted by JREkiwi

Apologies, my HDMI problem was with the 12/22 update, I thought the 12/24 reference was a typo, as I'd not seen any notification of a 12/24 update.

John

i have also problem with 720p via hdmi - i press "video out" on remote it's restore good video.

[btrcp2000]

Same as bjkiller, mine gets fixed with vid out button.

[doc]

I've had this too. I've only noticed it when I've turned the extender on and forgotten to turn the TV on straight away.

A power cycle has always sorted it. I haven't tried the video out button, I'll try that the next time I forget, which will probably be tomorrow!

[gplasky]

I've tried all the beta firmware updates for the HD100 since 12/22 and on each one ( 12/22, 12/23 and 12/24) I have lost HDMI and cannot get it back. No amount of power on/off or pushes of the video out button fixes it. I have to revert to the Aug version.

Gerry

[valnar]

Originally Posted by gplasky

I've tried all the beta firmware updates for the HD100 since 12/22 and on each one ( 12/22, 12/23 and 12/24) I have lost HDMI and cannot get it back. No amount of power on/off or pushes of the video out button fixes it. I have to revert to the Aug version.

Gerry

Yep, same here. Any new betas since my first post did not fix it for me either, even with trying the video-out button. I've reported it to Sage. Please do so as well.

[gplasky]

Reported on 12/22 and everytime since.

Gerry

[JREkiwi]

I've just upgraded to the 12/24 beta and had no problem with my HDMI. The HD-100 didn't reboot at the end of the firmware update, so I gave it a power off via the rear switch (I always do that anyway, as part of my normal firmware upgrade procedure) and HDMI came up fine.

John