No sound from Live TV But Got sound when Playing Videos!

[lfilomeno]

I swapped my PVR2-USB tuner for two HVR's-1950's on the server. Once I configured the two tuners, If I go to the server I got sound from Live TV; but when I go to the extenders (HD-200), I can see live TV video but got no audio! (I am using Cat5e, not wireless) If I played any of the recorded programs or videos stored on the server, I got audio and video through the extender! Do I nned to setup anything else on the server for live TV? The server is running version 6.4.5.1 The HD-200 firmware is 20081230 0 The original setup has a PVR2-USB tuner which gave no audio/video problems while watching Live TV on the extenders. Thanks in advance for any tips that could resolve this issue.

[gplasky]

Make sure you use the remote for the HD200 and make sure the volume is turned all he way up for the extender. (I don't know if you're using a receiver for the sound or not.)

Gerry

[lfilomeno]

I am using the remote. The Volume is all the way up. The TV is connected to the HD-200 via composite. This is so weird! I just reset everything and once again I got audio and video from the two tuners on the server. This morning, I got audio and video from tuner 2 (From Live TV), and just video (live TV) from tuner 1! Could this be a driver issue?

[lfilomeno]

After spending almost 2 hours reinstalling Sage, HVR's-1950 drivers, LM Remote Software, etc., I booted SAgeTV on the server and got the same results. Then came the embarassing question: Does the volume is up on all STB's? OOOOPS! One of the STB volume level was all the way down! So, in summary (and embarrased like hell!), both HVR's-1950 are working fine, the HD-200 are getting video and audio fine, kids have their faith back in me, and the WAF is going up! Thanks for everyone who chipped in to fix this issue. One thing I learned with Hauppauge tuners: The IR blaster works only for one card. For multiple Hauppauge tuners, have to use either a UIRT or the MCE remote kit paired up with LM Remote.