|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
04-15-2010, 05:36 AM
|
|||
|
|||
|
HVR-1600 & HVR-1850 Randomly "Cannot Start" error 10
My system has both an HVR-1600 and HVR-1850. Drivers are newest. I usually shutdown and reboot the sytsem every 3-4 days. Lately, I've been having problems, alternately it seems, with these cards either not starting on boot or, if they do, having to restart (greenish "i" alert) during a recording. Of course if they fail to start on boot Sage does not even load them as tuner choices.
Anyone else have this ? Are they fighting for an IRQ or some type of resource? Or mixing up drivers somehow? Since one is a PCI and one is an x1 card I'm not thinking it's the board so much, but maybe. Any thoughts are appreciated. Thanks.
__________________
Asus P5Q Premium MB, E6750, 4GB RAM, 32-bit XP Pro SP3, 3Ware 9590SE controller, 80GB 7.2K Laptop boot drive w/SuperSpeed Cache Utility & eBoostr, (1) KWorld ATSC-110, (1) 950Q USB, (1) 2250 tuner, (1) HD-PVR using USB-UIRT, (1) 1600 Dual card, (1) DVICO Fusion 5 Gold, (1) Hauppauge 1250, (1) Hauppauge 2250, 8 various storage HD's, NEC-based x1 USB add-on card, 2 outdoor antennas capturing 2 different OTA markets, Dish Network w/HD Receiver for HD-PVR. 
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hauppauge HVR-2250 + HVR-1600 Remote/IR Issue | ptzink | Hardware Support | 6 | 03-08-2010 01:22 PM |
| HVR-1600 & HVR-2250 - each missing diff channel | TwistedMelon | Hardware Support | 1 | 02-11-2010 06:17 PM |
| No Signal error Hauppauge HVR-1850 Win 7/64 | Waterman | Hardware Support | 1 | 11-21-2009 06:05 PM |
| HVR-2250 doesn't have a "QAM" tuner option | MickBurke | Hardware Support | 10 | 11-09-2008 04:38 PM |
| SageTV won't start, and broke my HVR-1600 | danimal99 | SageTV Software | 2 | 05-30-2007 09:17 AM |
Linear Mode
