|
SageTV Media Extender Discussion related to any SageTV Media Extender used directly by SageTV. Questions, issues, problems, suggestions, etc. relating to a SageTV supported media extender should be posted here. Use the SageTV HD Theater - Media Player forum for issues related to using an HD Theater while not connected to a SageTV server. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
No Audio
I thought my new system was up and running. I went to watch a recorded show and had no audio. This was a recording on one of the new HD-PVR2. So I tried a live recording and no audio, tried another recording and no audio. I went into detailed setup and change the LAV audio codec to mpg2 codec and still no audio.
When I set this all up I was in my computer room with 50 footer HDMI cables to each DH-PVR2 from My 2 sat receivers and all worked fine. When I moved it to my a/v cabinet I changed it to componet cables. Well I just went back in and looked the video source and discovered that the only option for componet is with spdif audio. Is there any other way to use the analog r & l audio with componet video? I don't see any other options, but thought I would ask if there were any. Thanks Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's |
#2
|
|||
|
|||
Quote:
* Component * Composite * S-Video On the other hand, selecting "Component + SPDIF", uses Component inputs for video and SPDIF for audio.
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. |
#3
|
||||
|
||||
I just looked again. I don't have a component showing by its self. All that is showing is component and spdif
Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's |
#4
|
||||
|
||||
Quote:
I take it you have no problems with analog audio if SageTV is out of the picture and you view your HD-PVR source through say, the ArcSoft products or some other recording software? You are on the latest build of SageTV, v9? This is an existing tuner entry, right? I'd shut everything down and backup SageTV (at least the properties and Wiz.bin files, if not the entire SageTV directory). Then bring SageTV up again. If you only have one tuner for the channel list you are using, you may want to first duplicate with a dummy tuner so you don't lose any modifications to it and can use it later. Then, remove the tuner for the HD-PVR. Now go and add a new tuner with component video and you should see all the audio options available now. I think for analog audio with Component, there simply is a another dialog button with no S/PDIF option. You may need to shut down SageTV and manually remove all the old tuner's "mmc/encoders"... entries in the SageTV.properties file and try again if that doesn't work. It was explained to me that SageTV has never been fixed to have an existing tuner have all the audio options available, only the newly added ones. Good luck. |
#5
|
||||
|
||||
This is a brand new setup with all new equipment. The HD-PVR2's are the new model 1512.
I had no audio on either HD-PVR2 in sage. When I used the Hauppauge software I had audio on 1 tuner. the other would not let me select an audio other than spdif. So I uninstalled the hauppauge software, uninstalled the drivers. Rebooted machine downloaded the drivers from hauppauge again and reinstalled and it found the dvr's and said install was successful, rebooted, ran add video source and still had the same options component & spdif is the only component showing. See attached picture for options I have. So I have ordered a couple of spdif cables as my dishnetwork receivers have that as an output. Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's Last edited by Doubledose; 03-03-2022 at 05:40 AM. |
#6
|
||||
|
||||
The highest quality is HDMI+SPDIF (optical). I suppose there might need to be one of those HDMI splitters between the Sat receiver and the HDPVR2.
|
#7
|
||||
|
||||
Quote:
Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's Last edited by Doubledose; 03-04-2022 at 05:41 AM. |
#8
|
||||
|
||||
Glad everything worked out.
But I'm curious though, your screenshot. What device/OS was that taken from? I'm pretty sure that's not the interface I see when I add a new tuner in SageTV under Windows. There does exist a Component + analog audio pairing, because I've used that combination (there use to be terrible sync problems with HD-PVR digital audio several years ago, so was best to avoid it). Strange that it didn't work for you. |
#9
|
||||
|
||||
Quote:
Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's |
#10
|
||||
|
||||
Here is why I hooked up component from the hauppauge website.
Quote:
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's |
#11
|
||||
|
||||
Have you checked your PM's lately
|
#12
|
|||
|
|||
Quote:
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. |
#13
|
||||
|
||||
I am glad you found an answer for that. Because I kept thinking what did I not install to make this not show up as they have said above.
Thanks Wayne
__________________
New setup 1-22 GIGABYTE B560 HD3 MB | Intel I5 6 core CPU | 500 GB WD SSD system drive | (2) 2TB Western Digital SSD drives pooled | 16 GB DDR ram | UHD 630 on board graphics| Win 10 64 bit | SageTV 9 | (5) Sage HD TV extenders | (1) HDHomeRun quad tuner HD OTA | (1) HDHomeRun Dual tuner HD OTA | (2) 1512 HD-PVR2s recording from 2 Dish Network VIP 211K's with Uirt ir control | MX-700 Home theater remote | 60" LED TV | (4) 32" Lcd TV's Last edited by Doubledose; 03-05-2022 at 05:11 AM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I tell Sage to switch from audio card to HDMI digital audio? | SteveP | SageTV Software | 3 | 04-13-2011 01:12 AM |
New cable box and now audio is out of sync. Audio Delay in Detailed settings working | judoGTI | SageTV Software | 0 | 05-29-2010 12:09 PM |
720p - 1080p no audio on extender but audio on theater pc | Rezolution | SageTV Media Extender | 10 | 10-30-2009 06:43 AM |
No Audio Playing Music, Audio Fine For TV/Videos | pstockha | SageTV Software | 2 | 07-15-2008 06:15 PM |
No Jukebox audio , video audio works fine. | RobertdeWit | SageTV Beta Test Software | 3 | 02-05-2004 09:00 PM |